CALIBRATION AND MEASUREMENT
3D Measurement Calibration Services
A coordinate measuring machine (CMM) is a device that can measures the geometry of physical objects by sensing discrete points on the surface of the object with a designated probe.
Basically, CMM able to measure physical objects or gauges according to customer requirement. Type of gauges such as limit gauge or special gauges.
Apart from basic measurements, such as length, diameter measurements, angle, CMM also able to measure according to Geometrical Dimensioning and Tolerancing. It’s such as, straightness, Flatness, roundness, etc.
The size of our CMM machine is, X axis 900 mm, Y axis 1200 and Z axis 900 mm with accuracy of (1.8 + L / 333) μm where L is in mm.
Our CMM is also capable to compensate the temperature of the machine and object to be measured at the desired temperature, usually setting it at 20 ° C. This will reduce the error in the expansion coefficient.
Caliper/ Snap Gauge